/**

  * $Id: ide.h,v 1.13 2007-01-31 10:58:42 nkeynes Exp $

  *

  * This file defines the interface and structures of the dreamcast's IDE 

  * port. Note that the register definitions are in asic.h, as the registers

  * fall into the general ASIC ranges (and I don't want to use smaller pages

  * at this stage). The registers here are exactly as per the ATA 

  * specifications, which makes things a little easier.

  *

  * Copyright (c) 2005 Nathan Keynes.

  *

  * This program is free software; you can redistribute it and/or modify

  * it under the terms of the GNU General Public License as published by

  * the Free Software Foundation; either version 2 of the License, or

  * (at your option) any later version.

  *

  * This program is distributed in the hope that it will be useful,

  * but WITHOUT ANY WARRANTY; without even the implied warranty of

  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

  * GNU General Public License for more details.

  */

 #ifndef dream_ide_H

 #define dream_ide_H 1

 #include "dream.h"

 struct ide_registers {

     /* IDE interface registers */

     uint8_t status;  /* A05F709C + A05F7018 Read-only */

     uint8_t control; /* A05F7018 Write-only 01110 */

     uint8_t error;   /* A05F7084 Read-only  10001 */

     uint8_t feature; /* A05F7084 Write-only 10001 */

     uint8_t count;   /* A05F7088 Read/Write 10010 */

     uint8_t disc;    /* A05F708C Read-only 10011 */

     uint8_t lba0;    /* A05F708C Write-only 10011 (NB: Presumed, TBV */

     uint8_t lba1;    /* A05F7090 Read/Write 10100 */

     uint8_t lba2;    /* A05F7094 Read/Write 10101 */

     uint8_t device;  /* A05F7098 Read/Write 10110 */

     uint8_t command; /* A05F709C Write-only 10111 */

     /* Internal IDE state */

     uint8_t intrq_pending; /* Flag to indicate if the INTRQ line is active */

     gboolean interface_enabled;

     gboolean was_reset; /* Flag indicating that the device has just been reset */

     int state;

     /* Sense response for the last executed packet command */

     unsigned char gdrom_sense[10];

     /* offset in the buffer of the next word to read/write, or -1

      * if inactive.

      */ 

     int data_offset;

     int data_length;

     /* Status reporting information */

     uint8_t last_read_track;

     uint32_t read_lba;

     uint32_t read_mode;

     uint32_t sectors_left; /* sectors left after current read */

 };

 #define IDE_STATE_IDLE      0 

 #define IDE_STATE_CMD_WRITE 1

 #define IDE_STATE_PIO_READ  2

 #define IDE_STATE_PIO_WRITE 3

 #define IDE_STATE_DMA_READ  4

 #define IDE_STATE_DMA_WRITE 5

 #define IDE_STATE_BUSY      6

 /* Flag bits */

 #define IDE_STATUS_BSY  0x80    /* Busy */

 #define IDE_STATUS_DRDY 0x40    /* Device ready */

 #define IDE_STATUS_DMRD 0x20    /* DMA Request */

 #define IDE_STATUS_SERV 0x10   

 #define IDE_STATUS_DRQ  0x08

 #define IDE_STATUS_CHK  0x01    /* Check condition (ie error) */

 #define IDE_FEAT_DMA 0x01

 #define IDE_FEAT_OVL 0x02

 #define IDE_COUNT_CD 0x01       /* Command (1)/Data (0) */

 #define IDE_COUNT_IO 0x02       /* Input (1)/Output (0) */

 #define IDE_COUNT_REL 0x04      /* Release device */

 #define IDE_CTL_RESET 0x04

 #define IDE_CTL_IRQEN 0x02 /* IRQ enabled when == 0 */

 #define IDE_CMD_NOP 0x00

 #define IDE_CMD_RESET_DEVICE 0x08

 #define IDE_CMD_PACKET 0xA0

 #define IDE_CMD_IDENTIFY_PACKET_DEVICE 0xA1

 #define IDE_CMD_SERVICE 0xA2

 #define IDE_CMD_SET_FEATURE 0xEF

 #define IDE_FEAT_SET_TRANSFER_MODE 0x03

 #define IDE_XFER_PIO        0x00

 #define IDE_XFER_PIO_FLOW   0x08

 #define IDE_XFER_MULTI_DMA  0x20

 #define IDE_XFER_ULTRA_DMA  0x40

 extern struct ide_registers idereg;

 /* Note: control can be written at any time - all other registers are writable

  * only when ide_can_write_regs() is true

  */

 #define ide_can_write_regs() ((idereg.status&0x80)==0)

 #define IS_IDE_IRQ_ENABLED() ((idereg.control&0x02)==0)

 uint16_t ide_read_data_pio(void);

 void ide_write_data_pio( uint16_t value );

 uint32_t ide_read_data_dma( uint32_t addr, uint32_t length );

 uint8_t ide_read_status(void);

 uint8_t ide_get_drive_status(void);

 void ide_write_buffer( unsigned char *data, int length ); 

 void ide_write_command( uint8_t command );

 void ide_write_control( uint8_t value );

 void ide_dma_read_req( uint32_t addr, uint32_t length );

 #endif