Search
lxdream.org :: lxdream/src/sh4/sh4.h
lxdream 0.9.1
released Jun 29
Download Now
filename src/sh4/sh4.h
changeset 904:5b92e51ac06b
prev903:1337c7a7dd6b
next929:fd8cb0c82f5f
next953:f4a156508ad1
author nkeynes
date Wed Oct 29 23:36:31 2008 +0000 (13 years ago)
permissions -rw-r--r--
last change Enable the FIPR SSE3 code for now, and add a comment on the sh4r.fr alignment
view annotate diff log raw
     1 /**
     2  * $Id: sh4.h 577 2008-01-01 05:08:38Z nkeynes $
     3  * 
     4  * This file defines the public functions and definitions exported by the SH4
     5  * modules.
     6  *
     7  * Copyright (c) 2005 Nathan Keynes.
     8  *
     9  * This program is free software; you can redistribute it and/or modify
    10  * it under the terms of the GNU General Public License as published by
    11  * the Free Software Foundation; either version 2 of the License, or
    12  * (at your option) any later version.
    13  *
    14  * This program is distributed in the hope that it will be useful,
    15  * but WITHOUT ANY WARRANTY; without even the implied warranty of
    16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    17  * GNU General Public License for more details.
    18  */
    20 #ifndef lxdream_sh4_H
    21 #define lxdream_sh4_H 1
    23 #include "lxdream.h"
    24 #include "mem.h"
    26 #ifdef __cplusplus
    27 extern "C" {
    28 #endif
    31 /**
    32  * SH4 is running normally 
    33  */
    34 #define SH4_STATE_RUNNING 1
    35 /**
    36  * SH4 is not executing instructions but all peripheral modules are still
    37  * running
    38  */
    39 #define SH4_STATE_SLEEP 2
    40 /**
    41  * SH4 is not executing instructions, DMAC is halted, but all other peripheral
    42  * modules are still running
    43  */
    44 #define SH4_STATE_DEEP_SLEEP 3
    45 /**
    46  * SH4 is not executing instructions and all peripheral modules are also
    47  * stopped. As close as you can get to powered-off without actually being
    48  * off.
    49  */
    50 #define SH4_STATE_STANDBY 4
    52 /**
    53  * sh4r.event_types flag indicating a pending IRQ
    54  */
    55 #define PENDING_IRQ 1
    57 /**
    58  * sh4r.event_types flag indicating a pending event (from the event queue)
    59  */
    60 #define PENDING_EVENT 2
    62 /**
    63  * SH4 register structure
    64  */
    65 struct sh4_registers {
    66     uint32_t r[16];
    67     uint32_t sr, pr, pc;
    68     union {
    69         int32_t i;
    70         float f;
    71     } fpul;
    72     uint32_t t, m, q, s; /* really boolean - 0 or 1 */
    73     float fr[2][16]; /* Must be aligned on 16-byte boundary */
    74     uint32_t fpscr;
    75     uint32_t pad; /* Pad up to 64-bit boundaries */
    76     uint64_t mac;
    77     uint32_t gbr, ssr, spc, sgr, dbr, vbr;
    79     uint32_t r_bank[8]; /* hidden banked registers */
    80     int32_t store_queue[16]; /* technically 2 banks of 32 bytes */
    82     uint32_t new_pc; /* Not a real register, but used to handle delay slots */
    83     uint32_t event_pending; /* slice cycle time of the next pending event, or FFFFFFFF
    84                              when no events are pending */
    85     uint32_t event_types; /* bit 0 = IRQ pending, bit 1 = general event pending */
    86     int in_delay_slot; /* flag to indicate the current instruction is in
    87      * a delay slot (certain rules apply) */
    88     uint32_t slice_cycle; /* Current nanosecond within the timeslice */
    89     int sh4_state; /* Current power-on state (one of the SH4_STATE_* values ) */
    90 };
    92 extern struct sh4_registers sh4r;
    94 /**
    95  * Switch between translation and emulation execution modes. Note that this
    96  * should only be used while the system is stopped. If the system was built
    97  * without translation support, this method has no effect.
    98  *
    99  * @param use TRUE for translation mode, FALSE for emulation mode.
   100  */
   101 void sh4_translate_set_enabled( gboolean use );
   103 /**
   104  * Test if system is currently using the translation engine.
   105  */
   106 gboolean sh4_translate_is_enabled();
   108 /**
   109  * Explicitly set the SH4 PC to the supplied value - this will be the next
   110  * instruction executed. This should only be called while the system is stopped.
   111  */
   112 void sh4_set_pc( int pc );
   114 /**
   115  * Execute (using the emulator) a single instruction (in other words, perform a
   116  * single-step operation). 
   117  */
   118 gboolean sh4_execute_instruction( void );
   120 /* SH4 breakpoints */
   121 void sh4_set_breakpoint( uint32_t pc, breakpoint_type_t type );
   122 gboolean sh4_clear_breakpoint( uint32_t pc, breakpoint_type_t type );
   123 int sh4_get_breakpoint( uint32_t pc );
   125 #ifdef __cplusplus
   126 }
   127 #endif
   128 #endif /* !lxdream_sh4_H */
.