4 * SH4 onboard DMA controller (DMAC) peripheral.
6 * Copyright (c) 2005 Nathan Keynes.
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
18 #define MODULE sh4_module
22 #include "sh4/sh4core.h"
23 #include "sh4/sh4mmio.h"
27 static int DMAC_xfer_size[8] = {8, 1, 2, 4, 32, 1, 1, 1};
30 #define CHCR_IE 0x04 /* Interrupt Enable */
31 #define CHCR_TE 0x02 /* Transfer End */
32 #define CHCR_DE 0x01 /* DMAC Enable */
34 #define IS_DMAC_ENABLED() ((MMIO_READ(DMAC,DMAOR)&0x07) == 0x01)
36 #define IS_AUTO_REQUEST(val) ((val & 0x0C00) == 0x0400)
37 #define CHANNEL_RESOURCE(val) ((val >> 8) & 0x0F)
39 #define DMA_SOURCE(chan) MMIO_READ(DMAC, SAR0 + (chan<<4))
40 #define DMA_DEST(chan) MMIO_READ(DMAC, DAR0 + (chan<<4))
41 #define DMA_COUNT(chan) (MMIO_READ(DMAC, DMATCR0 + (chan<<4)) & 0x00FFFFFF)
42 #define DMA_CONTROL(chan) MMIO_READ(DMAC, CHCR0 + (chan<<4))
43 #define IS_CHANNEL_ENABLED(ctrl) ((ctrl & 0x03) == 0x01)
44 #define IS_CHANNEL_IRQ_ENABLED(ctrl) (ctrl & CHCR_IE)
45 #define IS_CHANNEL_IRQ_ACTIVE(ctrl) ((ctrl & (CHCR_IE|CHCR_TE)) == (CHCR_IE|CHCR_TE))
47 #define DMARES_MEMORY_TO_MEMORY 0x00
48 #define DMARES_MEMORY_TO_DEVICE 0x02
49 #define DMARES_DEVICE_TO_MEMORY 0x03
50 #define DMARES_MEMORY_TO_MEMORY_AUTO 0x04
51 #define DMARES_MEMORY_TO_PERIPH_AUTO 0x05
52 #define DMARES_PERIPH_TO_MEMORY_AUTO 0x06
53 #define DMARES_SCI_TRANSMIT_EMPTY 0x08
54 #define DMARES_SCI_RECEIVE_FULL 0x09
55 #define DMARES_SCIF_TRANSMIT_EMPTY 0x0A
56 #define DMARES_SCIF_RECEIVE_FULL 0x0B
57 #define DMARES_MEMORY_TO_MEMORY_TMU 0x0C
58 #define DMARES_MEMORY_TO_PERIPH_TMU 0x0D
59 #define DMARES_PERIPH_TO_MEMORY_TMU 0x0E
61 void DMAC_set_control( uint32_t channel, uint32_t val )
63 uint32_t oldval = DMA_CONTROL(channel);
65 MMIO_WRITE( DMAC, CHCR0 + (channel<<4), val );
67 /* If TE or IE are cleared, clear the interrupt request */
68 if( IS_CHANNEL_IRQ_ACTIVE(oldval) &&
69 !IS_CHANNEL_IRQ_ACTIVE(val) )
70 intc_clear_interrupt( INT_DMA_DMTE0+channel );
72 resource = CHANNEL_RESOURCE(val);
73 if( IS_CHANNEL_ENABLED(val) ) {
74 if( resource >= DMARES_MEMORY_TO_MEMORY_AUTO &&
75 resource < DMARES_SCI_TRANSMIT_EMPTY ) {
80 /* Everything else we don't need to care about until we actually try to
85 MMIO_REGION_READ_FN( DMAC, reg )
87 return MMIO_READ( DMAC, reg&0xFFF );
89 MMIO_REGION_READ_DEFSUBFNS(DMAC)
91 MMIO_REGION_WRITE_FN( DMAC, reg, val )
96 MMIO_WRITE( DMAC, reg, val );
98 case CHCR0: DMAC_set_control( 0, val ); break;
99 case CHCR1: DMAC_set_control( 1, val ); break;
100 case CHCR2: DMAC_set_control( 2, val ); break;
101 case CHCR3: DMAC_set_control( 3, val ); break;
103 MMIO_WRITE( DMAC, reg, val );
108 * Execute up to run_count transfers on the specified channel. Assumes the
109 * trigger for the channel has been received.
111 * @param channel Channel number (0-3) to run.
112 * @param run_count number of transfers to execute, or 0 to run to the
113 * end of the transfer count.
115 void DMAC_run_channel( uint32_t channel, uint32_t run_count )
118 #if 0 /* Should really finish this */
119 char burst[32]; /* Transfer burst */
120 uint32_t control = DMA_CONTROL(channel);
122 if( IS_CHANNEL_ENABLED(control) ) {
123 uint32_t source = DMA_SOURCE(channel);
124 uint32_t dest = DMA_DEST(channel);
125 uint32_t count = DMA_COUNT( channel );
128 if( run_count == 0 || run_count > count )
130 uint32_t xfersize = DMAC_xfer_size[ (control >> 4)&0x07 ];
131 int source_step, dest_step;
132 int resource = (control >> 8) & 0x0F;
133 switch( (control >> 14) & 0x03 ) {
134 case 0: dest_step = 0; break;
135 case 1: dest_step = xfersize; break;
136 case 2: dest_step = -xfersize; break;
137 case 3: dest_step = 0; break; /* Illegal */
139 switch( (control >> 12) & 0x03 ) {
140 case 0: source_step = 0; break;
141 case 1: source_step = xfersize; break;
142 case 2: source_step = -xfersize; break;
143 case 3: source_step = 0; break; /* Illegal */
146 while( run_count > 0 ) {
148 if( (resource & 0x02) == 0 ) {
149 /* Source is a normal memory address */
156 if( (resource & 0x01) == 0 ) {
157 /* Destination is a normal memory address */
168 * Fetch a block of data by DMA from memory to an external device (ie the
169 * ASIC). The DMA channel must be configured for Mem=>dev or it will return
170 * no bytes and whinge mightily. Note this is NOT used for SH4 peripheral
173 * @return the number of bytes actually transferred.
175 uint32_t DMAC_get_buffer( int channel, sh4ptr_t buf, uint32_t numBytes )
177 uint32_t control = DMA_CONTROL(channel);
178 uint32_t source, count, run_count, size, i;
181 if( !IS_CHANNEL_ENABLED(control) || !IS_DMAC_ENABLED() )
184 if( ((control >> 8) & 0x0F) != DMARES_MEMORY_TO_DEVICE ) {
190 source = DMA_SOURCE(channel);
191 count = DMA_COUNT(channel);
192 if( count == 0 ) count = 0x01000000;
194 size = DMAC_xfer_size[ (control >> 4)&0x07 ];
195 run_count = numBytes / size;
196 if( run_count > count || run_count == 0 )
199 /* Do copy - FIXME: doesn't work when crossing regions */
200 sh4ptr_t region = mem_get_region( source );
201 switch( (control >> 12) & 0x03 ) {
203 memcpy( tmp, region, size );
204 for( i=0; i<run_count; i++ ) {
205 memcpy( buf, tmp, size );
210 i = run_count * size;
211 memcpy( buf, region, i );
215 for( i=0; i<run_count; i++ ) {
216 memcpy( buf, region, size );
220 source -= (run_count * size);
223 return 0; /* Illegal */
226 /* Update the channel registers */
228 MMIO_WRITE( DMAC, SAR0 + (channel<<4), source );
229 MMIO_WRITE( DMAC, DMATCR0 + (channel<<4), count );
232 if( IS_CHANNEL_IRQ_ENABLED(control) )
233 intc_raise_interrupt( INT_DMA_DMTE0 + channel );
234 MMIO_WRITE( DMAC, CHCR0 + (channel<<4), control );
237 return run_count * size;
240 uint32_t DMAC_put_buffer( int channel, sh4ptr_t buf, uint32_t numBytes )
242 uint32_t control = DMA_CONTROL(channel);
243 uint32_t dest, count, run_count, size, i;
245 if( !IS_CHANNEL_ENABLED(control) || !IS_DMAC_ENABLED() )
248 if( ((control >> 8) & 0x0F) != DMARES_DEVICE_TO_MEMORY ) {
253 dest = DMA_DEST(channel);
254 count = DMA_COUNT(channel);
255 if( count == 0 ) count = 0x01000000;
257 size = DMAC_xfer_size[ (control >> 4)&0x07 ];
258 run_count = numBytes / size;
259 if( run_count > count || run_count == 0 )
262 /* Do copy - FIXME: doesn't work when crossing regions */
263 sh4ptr_t region = mem_get_region( dest );
264 switch( (control >> 12) & 0x03 ) {
266 for( i=0; i<run_count; i++ ) {
267 /* Doesn't make a whole lot of sense, but hey... */
268 memcpy( region, buf, size );
273 i = run_count * size;
274 memcpy( region, buf, i );
278 for( i=0; i<run_count; i++ ) {
279 memcpy( region, buf, size );
283 dest -= (run_count * size);
286 return 0; /* Illegal */
289 /* Update the channel registers */
291 MMIO_WRITE( DMAC, DAR0 + (channel<<4), dest );
292 MMIO_WRITE( DMAC, DMATCR0 + (channel<<4), count );
295 if( IS_CHANNEL_IRQ_ENABLED(control) )
296 intc_raise_interrupt( INT_DMA_DMTE0 + channel );
297 MMIO_WRITE( DMAC, CHCR0 + (channel<<4), control );
299 return run_count * size;
302 void DMAC_reset( void )
307 void DMAC_save_state( FILE *F )
312 int DMAC_load_state( FILE *f )
317 void DMAC_trigger( int resource )
320 if( !IS_DMAC_ENABLED() )
322 for( i=0; i<4; i++ ) {
323 uint32_t control = DMA_CONTROL(i);
324 if( IS_CHANNEL_ENABLED(control) ) {
325 uint32_t channel_res = CHANNEL_RESOURCE(control);
328 if( channel_res == DMARES_MEMORY_TO_MEMORY )
329 DMAC_run_channel(i,1);
332 if( channel_res == DMARES_SCI_TRANSMIT_EMPTY )
333 DMAC_run_channel(i,1);
336 if( channel_res == DMARES_SCI_RECEIVE_FULL )
337 DMAC_run_channel(i,1);
340 if( channel_res == DMARES_SCIF_TRANSMIT_EMPTY )
341 DMAC_run_channel(i,1);
344 if( channel_res == DMARES_SCIF_RECEIVE_FULL )
345 DMAC_run_channel(i,1);
348 if( channel_res >= DMARES_MEMORY_TO_MEMORY_TMU )
349 DMAC_run_channel(i,1);
.