/**

 * $Id$

 *

 * MMIO region and supporting function declarations. Private to the sh4

 * module.

 *

 * Copyright (c) 2005 Nathan Keynes.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License as published by

 * the Free Software Foundation; either version 2 of the License, or

 * (at your option) any later version.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */

#include "lxdream.h"

#include "mmio.h"

#if (defined(MMIO_IMPL) && !defined(SH4MMIO_IMPL)) || \

    (!defined(MMIO_IMPL) && !defined(SH4MMIO_IFACE))

#ifdef __cplusplus

extern "C" {

#endif

#ifdef MMIO_IMPL

#define SH4MMIO_IMPL

#else

#define SH4MMIO_IFACE

#endif

/* SH7750 onchip mmio devices */

MMIO_REGION_BEGIN( 0xFF000000, MMU, "MMU Registers" )

    LONG_PORT( 0x000, PTEH, PORT_MRW, UNDEFINED, "Page table entry high" )

    LONG_PORT( 0x004, PTEL, PORT_MRW, UNDEFINED, "Page table entry low" )

    LONG_PORT( 0x008, TTB,  PORT_MRW, UNDEFINED, "Translation table base" )

    LONG_PORT( 0x00C, TEA,  PORT_MRW, UNDEFINED, "TLB exception address" )

    LONG_PORT( 0x010, MMUCR,PORT_MRW, 0, "MMU control register" )

    BYTE_PORT( 0x014, BASRA, PORT_MRW, UNDEFINED, "Break ASID A" ) /* UBC */

    BYTE_PORT( 0x018, BASRB, PORT_MRW, UNDEFINED, "Break ASID B" ) /* UBC */

    LONG_PORT( 0x01C, CCR,  PORT_MRW, 0, "Cache control register" )

    LONG_PORT( 0x020, TRA,  PORT_MRW, UNDEFINED, "TRAPA exception register" )

    LONG_PORT( 0x024, EXPEVT,PORT_MRW, 0, "Exception event register" )

    LONG_PORT( 0x028, INTEVT,PORT_MRW, UNDEFINED, "Interrupt event register" )

    LONG_PORT( 0x02C, MMUUNK1, PORT_MRW, 0, "Unknown MMU/general register" )

    LONG_PORT( 0x030, SH4VER, PORT_MRW, 0x040205C1, "SH4 version register (PVR)" ) /* Renamed to avoid naming conflict */

    LONG_PORT( 0x034, PTEA, PORT_MRW, UNDEFINED, "Page table entry assistance" )

    LONG_PORT( 0x038, QACR0,PORT_MRW, UNDEFINED, "Queue address control 0" )

    LONG_PORT( 0x03C, QACR1,PORT_MRW, UNDEFINED, "Queue address control 1" )

    WORD_PORT( 0x084, PMCR1, PORT_MRW, 0, "Performance counter control 1" )

    WORD_PORT( 0x088, PMCR2, PORT_MRW, 0, "Performance counter control 2" )

MMIO_REGION_END

/* Performance counter values (undocumented) */

MMIO_REGION_BEGIN( 0xFF100000, PMM, "Performance monitoring" )

    LONG_PORT( 0x004, PMCTR1H, PORT_MR, 0, "Performance counter 1 High" )

    LONG_PORT( 0x008, PMCTR1L, PORT_MR, 0, "Performance counter 1 Low" )

    LONG_PORT( 0x00C, PMCTR2H, PORT_MR, 0, "Performance counter 2 High" )

    LONG_PORT( 0x010, PMCTR2L, PORT_MR, 0, "Performance counter 2 Low" )

MMIO_REGION_END

/* User Break Controller (Page 717 [757] of sh7750h manual) */

MMIO_REGION_BEGIN( 0xFF200000, UBC, "User Break Controller" )

    LONG_PORT( 0x000, BARA, PORT_MRW, UNDEFINED, "Break address A" )

    BYTE_PORT( 0x004, BAMRA, PORT_MRW, UNDEFINED, "Break address mask A" )

    WORD_PORT( 0x008, BBRA, PORT_MRW, 0, "Break bus cycle A" )

    LONG_PORT( 0x00C, BARB, PORT_MRW, UNDEFINED, "Break address B" )

    BYTE_PORT( 0x010, BAMRB, PORT_MRW, UNDEFINED, "Break address mask B" )

    WORD_PORT( 0x014, BBRB, PORT_MRW, 0, "Break bus cycle B" )

    LONG_PORT( 0x018, BDRB, PORT_MRW, UNDEFINED, "Break data B" )

    LONG_PORT( 0x01C, BDMRB, PORT_MRW, UNDEFINED, "Break data mask B" )

    WORD_PORT( 0x020, BRCR, PORT_MRW, 0, "Break control" )

MMIO_REGION_END

/* Bus State Controller (Page 293 [333] of sh7750h manual)

 * I/O Ports */

MMIO_REGION_BEGIN( 0xFF800000, BSC, "Bus State Controller" )

    LONG_PORT( 0x000, BCR1, PORT_MRW, 0, "Bus control 1" )

    WORD_PORT( 0x004, BCR2, PORT_MRW, 0x3FFC, "Bus control 2" )

    LONG_PORT( 0x008, WCR1, PORT_MRW, 0x77777777, "Wait state control 1" )

    LONG_PORT( 0x00C, WCR2, PORT_MRW, 0xFFFEEFFF, "Wait state control 2" )

    LONG_PORT( 0x010, WCR3, PORT_MRW, 0x07777777, "Wait state control 3" )

    LONG_PORT( 0x014, MCR, PORT_MRW, 0, "Memory control register" )

    WORD_PORT( 0x018, PCR, PORT_MRW, 0, "PCMCIA control register" )

    WORD_PORT( 0x01C, RTCSR, PORT_MRW, 0, "Refresh timer control/status" )

    WORD_PORT( 0x020, RTCNT, PORT_MRW, 0, "Refresh timer counter" )

    WORD_PORT( 0x024, RTCOR, PORT_MRW, 0, "Refresh timer constant" )

    WORD_PORT( 0x028, RFCR, PORT_MRW, 0, "Refresh count" )

    LONG_PORT( 0x02C, PCTRA, PORT_MRW, 0, "Port control register A" )

    WORD_PORT( 0x030, PDTRA, PORT_RW, UNDEFINED, "Port data register A" )

    LONG_PORT( 0x040, PCTRB, PORT_MRW, 0, "Port control register B" )

    WORD_PORT( 0x044, PDTRB, PORT_RW, UNDEFINED, "Port data register B" )

    WORD_PORT( 0x048, GPIOIC, PORT_MRW, 0, "GPIO interrupt control register" )

MMIO_REGION_END

/* DMA Controller (Page 457 [497] of sh7750h manual) */

MMIO_REGION_BEGIN( 0xFFA00000, DMAC, "DMA Controller" )

    LONG_PORT( 0x000, SAR0, PORT_MRW, UNDEFINED, "DMA source address 0" )

    LONG_PORT( 0x004, DAR0, PORT_MRW, UNDEFINED, "DMA destination address 0" )

    LONG_PORT( 0x008, DMATCR0, PORT_MRW, UNDEFINED, "DMA transfer count 0" )

    LONG_PORT( 0x00C, CHCR0, PORT_MRW, 0, "DMA channel control 0" )

    LONG_PORT( 0x010, SAR1, PORT_MRW, UNDEFINED, "DMA source address 1" )

    LONG_PORT( 0x014, DAR1, PORT_MRW, UNDEFINED, "DMA destination address 1" )

    LONG_PORT( 0x018, DMATCR1, PORT_MRW, UNDEFINED, "DMA transfer count 1" )

    LONG_PORT( 0x01C, CHCR1, PORT_MRW, 0, "DMA channel control 1" )

    LONG_PORT( 0x020, SAR2, PORT_MRW, UNDEFINED, "DMA source address 2" )

    LONG_PORT( 0x024, DAR2, PORT_MRW, UNDEFINED, "DMA destination address 2" )

    LONG_PORT( 0x028, DMATCR2, PORT_MRW, UNDEFINED, "DMA transfer count 2" )

    LONG_PORT( 0x02C, CHCR2, PORT_MRW, 0, "DMA channel control 2" )

    LONG_PORT( 0x030, SAR3, PORT_MRW, UNDEFINED, "DMA source address 3" )

    LONG_PORT( 0x034, DAR3, PORT_MRW, UNDEFINED, "DMA destination address 3" )

    LONG_PORT( 0x038, DMATCR3, PORT_MRW, UNDEFINED, "DMA transfer count 3" )

    LONG_PORT( 0x03C, CHCR3, PORT_MRW, 0, "DMA channel control 3" )

    LONG_PORT( 0x040, DMAOR, PORT_MRW, 0, "DMA operation register" )

MMIO_REGION_END

#define FRQCR_CKOEN    0x0800

#define FRQCR_PLL1EN   0x0400

#define FRQCR_PLL2EN   0x0200

#define FRQCR_IFC_MASK 0x01C0

#define FRQCR_BFC_MASK 0x0038

#define FRQCR_PFC_MASK 0x0007

/* Clock Pulse Generator (page 233 [273] of sh7750h manual) */

MMIO_REGION_BEGIN( 0xFFC00000, CPG, "Clock Pulse Generator" )

    WORD_PORT( 0x000, FRQCR, PORT_MRW, 0x0E0A, "Frequency control" )

    BYTE_PORT( 0x004, STBCR, PORT_MRW, 0, "Standby control" )

    BYTE_PORT( 0x008, WTCNT, PORT_MRW, 0, "Watchdog timer counter" )

    BYTE_PORT( 0x00C, WTCSR, PORT_MRW, 0, "Watchdog timer control/status" )

    BYTE_PORT( 0x010, STBCR2, PORT_MRW, 0, "Standby control 2" )

MMIO_REGION_END

/* Real time clock (Page 253 [293] of sh7750h manual) */

MMIO_REGION_BEGIN( 0xFFC80000, RTC, "Realtime Clock" )

    BYTE_PORT( 0x000, R64CNT, PORT_R, UNDEFINED, "64 Hz counter" )

    BYTE_PORT( 0x004, RSECCNT, PORT_MRW, UNDEFINED, "Second counter" )

    /* ... */

MMIO_REGION_END

/* Interrupt controller (Page 699 [739] of sh7750h manual) */

MMIO_REGION_BEGIN( 0xFFD00000, INTC, "Interrupt Controller" )

    WORD_PORT( 0x000, ICR, PORT_MRW, 0x0000, "Interrupt control register" )

    WORD_PORT( 0x004, IPRA, PORT_MRW, 0x0000, "Interrupt priority register A" )

    WORD_PORT( 0x008, IPRB, PORT_MRW, 0x0000, "Interrupt priority register B" )

    WORD_PORT( 0x00C, IPRC, PORT_MRW, 0x0000, "Interrupt priority register C" )

    WORD_PORT( 0x010, IPRD, PORT_MRW, 0xDA74, "Interrupt priority register D" )

MMIO_REGION_END

/* Timer unit (Page 277 [317] of sh7750h manual) */

MMIO_REGION_BEGIN( 0xFFD80000, TMU, "Timer Unit" )

    BYTE_PORT( 0x000, TOCR, PORT_MRW, 0x00, "Timer output control register" )

    BYTE_PORT( 0x004, TSTR, PORT_MRW, 0x00, "Timer start register" )

    LONG_PORT( 0x008, TCOR0, PORT_MRW, 0xFFFFFFFF, "Timer constant 0" )

    LONG_PORT( 0x00C, TCNT0, PORT_MRW, 0xFFFFFFFF, "Timer counter 0" )

    WORD_PORT( 0x010, TCR0, PORT_MRW, 0x0000, "Timer control 0" )

    LONG_PORT( 0x014, TCOR1, PORT_MRW, 0xFFFFFFFF, "Timer constant 1" )

    LONG_PORT( 0x018, TCNT1, PORT_MRW, 0xFFFFFFFF, "Timer counter 1" )

    WORD_PORT( 0x01C, TCR1, PORT_MRW, 0x0000, "Timer control 1" )

    LONG_PORT( 0x020, TCOR2, PORT_MRW, 0xFFFFFFFF, "Timer constant 2" )

    LONG_PORT( 0x024, TCNT2, PORT_MRW, 0xFFFFFFFF, "Timer counter 2" )

    WORD_PORT( 0x028, TCR2, PORT_MRW, 0x0000, "Timer control 2" )

    LONG_PORT( 0x02C, TCPR2, PORT_R, UNDEFINED, "Input capture register" )

MMIO_REGION_END

/* Serial channel (page 541 [581] of sh7750h manual) */

MMIO_REGION_BEGIN( 0xFFE00000, SCI, "Serial Communication Interface" )

    BYTE_PORT( 0x000, SCSMR1, PORT_MRW, 0x00, "Serial mode register" )

    BYTE_PORT( 0x004, SCBRR1, PORT_MRW, 0xFF, "Bit rate register" )

    BYTE_PORT( 0x008, SCSCR1, PORT_MRW, 0x00, "Serial control register" )

    BYTE_PORT( 0x00C, SCTDR1, PORT_MRW, 0xFF, "Transmit data register" )

    BYTE_PORT( 0x010, SCSSR1, PORT_MRW, 0x84, "Serial status register" )

    BYTE_PORT( 0x014, SCRDR1, PORT_R, 0x00, "Receive data register" )

    BYTE_PORT( 0x01C, SCSPTR1, PORT_MRW, 0x00, "Serial port register" )

MMIO_REGION_END

MMIO_REGION_BEGIN( 0xFFE80000, SCIF, "Serial Controller (FIFO) Registers" )

    WORD_PORT( 0x000, SCSMR2, PORT_MRW, 0x0000, "Serial mode register (FIFO)" )

    BYTE_PORT( 0x004, SCBRR2, PORT_MRW, 0xFF, "Bit rate register (FIFO)" )

    WORD_PORT( 0x008, SCSCR2, PORT_MRW, 0x0000, "Serial control register" )

    BYTE_PORT( 0x00C, SCFTDR2, PORT_W, UNDEFINED, "Transmit FIFO data register" )

    WORD_PORT( 0x010, SCFSR2, PORT_MRW, 0x0060, "Serial status register (FIFO)" )

    BYTE_PORT( 0x014, SCFRDR2, PORT_R, UNDEFINED, "Receive FIFO data register" )

    WORD_PORT( 0x018, SCFCR2, PORT_MRW, 0x0000, "FIFO control register" )

    WORD_PORT( 0x01C, SCFDR2, PORT_MR, 0x0000, "FIFO data count register" )

    WORD_PORT( 0x020, SCSPTR2, PORT_MRW, 0x0000, "Serial port register (FIFO)" )

    WORD_PORT( 0x024, SCLSR2, PORT_MRW, 0x0000, "Line status register (FIFO)" )

MMIO_REGION_END

MMIO_REGION_LIST_BEGIN( sh4mmio )

    MMIO_REGION( MMU )

    MMIO_REGION( UBC )

    MMIO_REGION( BSC )

    MMIO_REGION( DMAC )

    MMIO_REGION( CPG )

    MMIO_REGION( RTC )

    MMIO_REGION( INTC )

    MMIO_REGION( TMU )

    MMIO_REGION( SCI )

    MMIO_REGION( SCIF )

    MMIO_REGION( PMM )

MMIO_REGION_LIST_END

/* ccr register bits */

#define CCR_IIX    0x00008000 /* IC index enable */

#define CCR_ICI    0x00000800 /* IC invalidation (always read as 0) */

#define CCR_ICE    0x00000100 /* IC enable */

#define CCR_OIX    0x00000080 /* OC index enable */

#define CCR_ORA    0x00000020 /* OC RAM enable */

#define CCR_OCI    0x00000008 /* OC invalidation (always read as 0) */

#define CCR_CB     0x00000004 /* Copy-back (P1 area cache write mode) */

#define CCR_WT     0x00000002 /* Write-through (P0,U0,P3 write mode) */

#define CCR_OCE    0x00000001 /* OC enable */

#define CCR_MASK   0x000089AF

#define CCR_RMASK  0x000081A7 /* Read mask */

#define MEM_OC_INDEX0   (CCR_ORA|CCR_OCE)

#define MEM_OC_INDEX1   (CCR_ORA|CCR_OIX|CCR_OCE)

#define PMCR_CLKF  0x0100

#define PMCR_PMCLR 0x2000

#define PMCR_PMST  0x4000

#define PMCR_PMEN  0x8000

#define PMCR_RUNNING (PMCR_PMST|PMCR_PMEN)

/* MMU functions */

void mmu_init(void);

void mmu_set_cache_mode( int );

void mmu_ldtlb(void);

#ifdef __cplusplus

}

#endif

#endif