/**

 * $Id: ide.h,v 1.6 2006-05-02 14:09:11 nkeynes Exp $

 *

 * This file defines the interface and structures of the dreamcast's IDE 

 * port. Note that the register definitions are in asic.h, as the registers

 * fall into the general ASIC ranges (and I don't want to use smaller pages

 * at this stage). The registers here are exactly as per the ATA 

 * specifications, which makes things a little easier.

 *

 * Copyright (c) 2005 Nathan Keynes.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License as published by

 * the Free Software Foundation; either version 2 of the License, or

 * (at your option) any later version.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */

#ifndef dream_ide_H

#define dream_ide_H 1

#include "dream.h"

struct ide_registers {

    uint8_t status;  /* A05F709C + A05F7018 Read-only */

    uint8_t control; /* A05F7018 Write-only 01110 */

    uint8_t error;   /* A05F7084 Read-only  10001 */

    uint8_t feature; /* A05F7084 Write-only 10001 */

    uint8_t count;   /* A05F7088 Read/Write 10010 */

    uint8_t disc;    /* A05F708C Read-only 10011 */

    uint8_t lba0;    /* A05F708C Write-only 10011 (NB: Presumed, TBV */

    uint8_t lba1;    /* A05F7090 Read/Write 10100 */

    uint8_t lba2;    /* A05F7094 Read/Write 10101 */

    uint8_t device;  /* A05F7098 Read/Write 10110 */

    uint8_t command; /* A05F709C Write-only 10111 */

    uint8_t intrq_pending; /* Flag to indicate if the INTRQ line is active */

    /* We don't keep the data register per se, rather the currently pending

     * data is kept here and read out a byte at a time (in PIO mode) or all at

     * once (in DMA mode). The IDE routines are responsible for managing this

     * memory. If dataptr == NULL, there is no data available.

     */

    unsigned char *data;

    uint16_t *readptr, *writeptr;

    uint16_t gdrom_error; /* Lo-byte = error code, Hi-byte = subcode */

    int datalen;

    int blocksize; /* Used to determine the transfer unit size */

    int blockleft; /* Bytes remaining in the current block */

};

#define IDE_ST_BUSY  0x80

#define IDE_ST_READY 0x40

#define IDE_ST_SERV  0x10

#define IDE_ST_DATA  0x08

#define IDE_ST_ERROR 0x01

#define IDE_CTL_RESET 0x04

#define IDE_CTL_IRQEN 0x02 /* IRQ enabled when == 0 */

#define IDE_CMD_RESET_DEVICE 0x08

#define IDE_CMD_PACKET 0xA0

#define IDE_CMD_IDENTIFY_PACKET_DEVICE 0xA1

#define IDE_CMD_SERVICE 0xA2

#define IDE_CMD_SET_FEATURE 0xEF

#define IDE_FEAT_SET_TRANSFER_MODE 0x03

#define IDE_XFER_PIO        0x00

#define IDE_XFER_PIO_FLOW   0x08

#define IDE_XFER_MULTI_DMA  0x20

#define IDE_XFER_ULTRA_DMA  0x40

extern struct ide_registers idereg;

/* Note: control can be written at any time - all other registers are writable

 * only when ide_can_write_regs() is true

 */

#define ide_can_write_regs() ((idereg.status&0x88)==0)

#define IS_IDE_IRQ_ENABLED() ((idereg.control&0x02)==0)

uint16_t ide_read_data_pio(void);

uint8_t ide_read_status(void);

void ide_write_data_pio( uint16_t value );

void ide_write_buffer( unsigned char *data, int length ); 

void ide_write_command( uint8_t command );

void ide_write_control( uint8_t value );

#endif