/**

 * $Id$

 *

 * This file defines the interface and structures of the dreamcast's IDE 

 * port. Note that the register definitions are in asic.h, as the registers

 * fall into the general ASIC ranges (and I don't want to use smaller pages

 * at this stage). The registers here are exactly as per the ATA 

 * specifications, which makes things a little easier.

 *

 * Copyright (c) 2005 Nathan Keynes.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License as published by

 * the Free Software Foundation; either version 2 of the License, or

 * (at your option) any later version.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */

#ifndef lxdream_ide_H

#define lxdream_ide_H 1

#include "lxdream.h"

#ifdef __cplusplus

extern "C" {

#endif

#define GDROM_DRIVE_STATUS_LENGTH 10

#define GDROM_SENSE_LENGTH 10

#define GDROM_MODE_LENGTH 32

#define IDE_DISC_READY 0x01 /* ored with above */

#define IDE_DISC_IDLE  0x02 /* ie spun-down */

#define IDE_DISC_NONE  0x06 /* No media in drive */

struct ide_registers {

    /* IDE interface registers */

    uint8_t status;  /* A05F709C + A05F7018 Read-only */

    uint8_t control; /* A05F7018 Write-only 01110 */

    uint8_t error;   /* A05F7084 Read-only  10001 */

    uint8_t feature; /* A05F7084 Write-only 10001 */

    uint8_t count;   /* A05F7088 Read/Write 10010 */

    uint8_t disc;    /* A05F708C Read-only 10011 */

    uint8_t lba0;    /* A05F708C Write-only 10011 (NB: Presumed, TBV */

    uint8_t lba1;    /* A05F7090 Read/Write 10100 */

    uint8_t lba2;    /* A05F7094 Read/Write 10101 */

    uint8_t device;  /* A05F7098 Read/Write 10110 */

    uint8_t command; /* A05F709C Write-only 10111 */

    /* Internal IDE state */

    uint8_t intrq_pending; /* Flag to indicate if the INTRQ line is active */

    gboolean interface_enabled;

    gboolean was_reset; /* Flag indicating that the device has just been reset */

    uint32_t state;

    uint32_t last_packet_command; /* Identifies the command executing during a r/w cycle */

    /* Sense response for the last executed packet command */

    unsigned char gdrom_sense[GDROM_SENSE_LENGTH];

    unsigned char gdrom_mode[GDROM_MODE_LENGTH];

    /* offset in the buffer of the next word to read/write, or -1

     * if inactive.

     */ 

    int32_t data_offset;

    int32_t data_length;

    /* Status reporting information */

    uint8_t last_read_track;

    uint32_t current_lba;

    uint32_t current_mode;

    uint32_t sectors_left; /* sectors left after current read */

};

#define IDE_STATE_IDLE      0 

#define IDE_STATE_CMD_WRITE 1

#define IDE_STATE_PIO_READ  2

#define IDE_STATE_PIO_WRITE 3

#define IDE_STATE_DMA_READ  4

#define IDE_STATE_DMA_WRITE 5

#define IDE_STATE_BUSY      6

/* Flag bits */

#define IDE_STATUS_BSY  0x80    /* Busy */

#define IDE_STATUS_DRDY 0x40    /* Device ready */

#define IDE_STATUS_DMRD 0x20    /* DMA Request */

#define IDE_STATUS_SERV 0x10   

#define IDE_STATUS_DRQ  0x08

#define IDE_STATUS_CHK  0x01    /* Check condition (ie error) */

#define IDE_FEAT_DMA 0x01

#define IDE_FEAT_OVL 0x02

#define IDE_COUNT_CD 0x01       /* Command (1)/Data (0) */

#define IDE_COUNT_IO 0x02       /* Input (1)/Output (0) */

#define IDE_COUNT_REL 0x04      /* Release device */

#define IDE_CTL_RESET 0x04

#define IDE_CTL_IRQEN 0x02 /* IRQ enabled when == 0 */

#define IDE_CMD_NOP 0x00

#define IDE_CMD_RESET_DEVICE 0x08

#define IDE_CMD_PACKET 0xA0

#define IDE_CMD_IDENTIFY_PACKET_DEVICE 0xA1

#define IDE_CMD_SERVICE 0xA2

#define IDE_CMD_SET_FEATURE 0xEF

#define IDE_FEAT_SET_TRANSFER_MODE 0x03

#define IDE_XFER_PIO        0x00

#define IDE_XFER_PIO_FLOW   0x08

#define IDE_XFER_MULTI_DMA  0x20

#define IDE_XFER_ULTRA_DMA  0x40

extern struct ide_registers idereg;

/* Note: control can be written at any time - all other registers are writable

 * only when ide_can_write_regs() is true

 */

#define ide_can_write_regs() ((idereg.status&0x80)==0)

#define IS_IDE_IRQ_ENABLED() ((idereg.control&0x02)==0)

uint16_t ide_read_data_pio(void);

void ide_write_data_pio( uint16_t value );

uint32_t ide_read_data_dma( uint32_t addr, uint32_t length );

uint8_t ide_read_status(void);

uint8_t ide_get_drive_status(void);

void ide_write_buffer( unsigned char *data, uint32_t length ); 

void ide_write_command( uint8_t command );

void ide_write_control( uint8_t value );

void ide_dma_read_req( uint32_t addr, uint32_t length );

#ifdef __cplusplus

}

#endif

#endif /* !lxdream_ide_H */